diff options
Diffstat (limited to 'linux/dev/drivers/scsi')
| -rw-r--r-- | linux/dev/drivers/scsi/eata_dma.c | 1607 | ||||
| -rw-r--r-- | linux/dev/drivers/scsi/g_NCR5380.c | 735 |
2 files changed, 2342 insertions, 0 deletions
diff --git a/linux/dev/drivers/scsi/eata_dma.c b/linux/dev/drivers/scsi/eata_dma.c new file mode 100644 index 0000000..e902ea1 --- /dev/null +++ b/linux/dev/drivers/scsi/eata_dma.c @@ -0,0 +1,1607 @@ +/************************************************************ + * * + * Linux EATA SCSI driver * + * * + * based on the CAM document CAM/89-004 rev. 2.0c, * + * DPT's driver kit, some internal documents and source, * + * and several other Linux scsi drivers and kernel docs. * + * * + * The driver currently: * + * -supports all ISA based EATA-DMA boards * + * like PM2011, PM2021, PM2041, PM3021 * + * -supports all EISA based EATA-DMA boards * + * like PM2012B, PM2022, PM2122, PM2322, PM2042, * + * PM3122, PM3222, PM3332 * + * -supports all PCI based EATA-DMA boards * + * like PM2024, PM2124, PM2044, PM2144, PM3224, * + * PM3334 * + * -supports the Wide, Ultra Wide and Differential * + * versions of the boards * + * -supports multiple HBAs with & without IRQ sharing * + * -supports all SCSI channels on multi channel boards * + * -supports ix86 and MIPS, untested on ALPHA * + * -needs identical IDs on all channels of a HBA * + * -can be loaded as module * + * -displays statistical and hardware information * + * in /proc/scsi/eata_dma * + * -provides rudimentary latency measurement * + * possibilities via /proc/scsi/eata_dma/<hostnum> * + * * + * (c)1993-96 Michael Neuffer * + * mike@i-Connect.Net * + * neuffer@mail.uni-mainz.de * + * * + * This program is free software; you can redistribute it * + * and/or modify it under the terms of the GNU General * + * Public License as published by the Free Software * + * Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be * + * useful, but WITHOUT ANY WARRANTY; without even the * + * implied warranty of MERCHANTABILITY or FITNESS FOR A * + * PARTICULAR PURPOSE. See the GNU General Public License * + * for more details. * + * * + * You should have received a copy of the GNU General * + * Public License along with this kernel; if not, write to * + * the Free Software Foundation, Inc., 675 Mass Ave, * + * Cambridge, MA 02139, USA. * + * * + * I have to thank DPT for their excellent support. I took * + * me almost a year and a stopover at their HQ, on my first * + * trip to the USA, to get it, but since then they've been * + * very helpful and tried to give me all the infos and * + * support I need. * + * * + * Thanks also to Simon Shapiro, Greg Hosler and Mike * + * Jagdis who did a lot of testing and found quite a number * + * of bugs during the development. * + ************************************************************ + * last change: 96/10/21 OS: Linux 2.0.23 * + ************************************************************/ + +/* Look in eata_dma.h for configuration and revision information */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/malloc.h> +#include <linux/in.h> +#include <linux/bios32.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <asm/byteorder.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/dma.h> +#ifdef MACH +#define flush_cache_all() +#else +#include <asm/pgtable.h> +#endif +#ifdef __mips__ +#include <asm/cachectl.h> +#endif +#include <linux/blk.h> +#include "scsi.h" +#include "sd.h" +#include "hosts.h" +#include "eata_dma.h" +#include "eata_dma_proc.h" + +#include <linux/stat.h> +#include <linux/config.h> /* for CONFIG_PCI */ + +struct proc_dir_entry proc_scsi_eata_dma = { + PROC_SCSI_EATA, 8, "eata_dma", + S_IFDIR | S_IRUGO | S_IXUGO, 2 +}; + +static u32 ISAbases[] = +{0x1F0, 0x170, 0x330, 0x230}; +static unchar EISAbases[] = +{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1}; +static uint registered_HBAs = 0; +static struct Scsi_Host *last_HBA = NULL; +static struct Scsi_Host *first_HBA = NULL; +static unchar reg_IRQ[] = +{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static unchar reg_IRQL[] = +{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; +static struct eata_sp *status = 0; /* Statuspacket array */ +static void *dma_scratch = 0; + +static struct eata_register *fake_int_base; +static int fake_int_result; +static int fake_int_happened; + +static ulong int_counter = 0; +static ulong queue_counter = 0; + +void eata_scsi_done (Scsi_Cmnd * scmd) +{ + scmd->request.rq_status = RQ_SCSI_DONE; + + if (scmd->request.sem != NULL) + up(scmd->request.sem); + + return; +} + +void eata_fake_int_handler(s32 irq, void *dev_id, struct pt_regs * regs) +{ + fake_int_result = inb((ulong)fake_int_base + HA_RSTATUS); + fake_int_happened = TRUE; + DBG(DBG_INTR3, printk("eata_fake_int_handler called irq%d base %p" + " res %#x\n", irq, fake_int_base, fake_int_result)); + return; +} + +#include "eata_dma_proc.c" + +#ifdef MODULE +int eata_release(struct Scsi_Host *sh) +{ + uint i; + if (sh->irq && reg_IRQ[sh->irq] == 1) free_irq(sh->irq, NULL); + else reg_IRQ[sh->irq]--; + + scsi_init_free((void *)status, 512); + scsi_init_free((void *)dma_scratch - 4, 1024); + for (i = 0; i < sh->can_queue; i++){ /* Free all SG arrays */ + if(SD(sh)->ccb[i].sg_list != NULL) + scsi_init_free((void *) SD(sh)->ccb[i].sg_list, + sh->sg_tablesize * sizeof(struct eata_sg_list)); + } + + if (SD(sh)->channel == 0) { + if (sh->dma_channel != BUSMASTER) free_dma(sh->dma_channel); + if (sh->io_port && sh->n_io_port) + release_region(sh->io_port, sh->n_io_port); + } + return(TRUE); +} +#endif + + +inline void eata_latency_in(struct eata_ccb *cp, hostdata *hd) +{ + uint time; + time = jiffies - cp->timestamp; + if(hd->all_lat[1] > time) + hd->all_lat[1] = time; + if(hd->all_lat[2] < time) + hd->all_lat[2] = time; + hd->all_lat[3] += time; + hd->all_lat[0]++; + if((cp->rw_latency) == WRITE) { /* was WRITE */ + if(hd->writes_lat[cp->sizeindex][1] > time) + hd->writes_lat[cp->sizeindex][1] = time; + if(hd->writes_lat[cp->sizeindex][2] < time) + hd->writes_lat[cp->sizeindex][2] = time; + hd->writes_lat[cp->sizeindex][3] += time; + hd->writes_lat[cp->sizeindex][0]++; + } else if((cp->rw_latency) == READ) { + if(hd->reads_lat[cp->sizeindex][1] > time) + hd->reads_lat[cp->sizeindex][1] = time; + if(hd->reads_lat[cp->sizeindex][2] < time) + hd->reads_lat[cp->sizeindex][2] = time; + hd->reads_lat[cp->sizeindex][3] += time; + hd->reads_lat[cp->sizeindex][0]++; + } +} + +inline void eata_latency_out(struct eata_ccb *cp, Scsi_Cmnd *cmd) +{ + int x, z; + short *sho; + long *lon; + x = 0; /* just to keep GCC quiet */ + cp->timestamp = jiffies; /* For latency measurements */ + switch(cmd->cmnd[0]) { + case WRITE_6: + x = cmd->cmnd[4]/2; + cp->rw_latency = WRITE; + break; + case READ_6: + x = cmd->cmnd[4]/2; + cp->rw_latency = READ; + break; + case WRITE_10: + sho = (short *) &cmd->cmnd[7]; + x = ntohs(*sho)/2; + cp->rw_latency = WRITE; + break; + case READ_10: + sho = (short *) &cmd->cmnd[7]; + x = ntohs(*sho)/2; + cp->rw_latency = READ; + break; + case WRITE_12: + lon = (long *) &cmd->cmnd[6]; + x = ntohl(*lon)/2; + cp->rw_latency = WRITE; + break; + case READ_12: + lon = (long *) &cmd->cmnd[6]; + x = ntohl(*lon)/2; + cp->rw_latency = READ; + break; + default: + cp->rw_latency = OTHER; + break; + } + if (cmd->cmnd[0] == WRITE_6 || cmd->cmnd[0] == WRITE_10 || + cmd->cmnd[0] == WRITE_12 || cmd->cmnd[0] == READ_6 || + cmd->cmnd[0] == READ_10 || cmd->cmnd[0] == READ_12) { + for(z = 0; (x > (1 << z)) && (z <= 11); z++) + /* nothing */; + cp->sizeindex = z; + } +} + + +void eata_int_handler(int irq, void *dev_id, struct pt_regs * regs) +{ + uint i, result = 0; + uint hba_stat, scsi_stat, eata_stat; + Scsi_Cmnd *cmd; + struct eata_ccb *ccb; + struct eata_sp *sp; + uint base; + uint x; + struct Scsi_Host *sh; + + for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->next) { + if (sh->irq != irq) + continue; + + while(inb((uint)sh->base + HA_RAUXSTAT) & HA_AIRQ) { + + int_counter++; + + sp = &SD(sh)->sp; +#ifdef __mips__ + sys_cacheflush(sp, sizeof(struct eata_sp), 2); +#endif + ccb = sp->ccb; + + if(ccb == NULL) { + eata_stat = inb((uint)sh->base + HA_RSTATUS); + printk("eata_dma: int_handler, Spurious IRQ %d " + "received. CCB pointer not set.\n", irq); + break; + } + + cmd = ccb->cmd; + base = (uint) cmd->host->base; + hba_stat = sp->hba_stat; + + scsi_stat = (sp->scsi_stat >> 1) & 0x1f; + + if (sp->EOC == FALSE) { + eata_stat = inb(base + HA_RSTATUS); + printk(KERN_WARNING "eata_dma: int_handler, board: %x cmd %lx " + "returned unfinished.\n" + "EATA: %x HBA: %x SCSI: %x spadr %lx spadrirq %lx, " + "irq%d\n", base, (long)ccb, eata_stat, hba_stat, + scsi_stat,(long)&status, (long)&status[irq], irq); + cmd->result = DID_ERROR << 16; + ccb->status = FREE; + cmd->scsi_done(cmd); + break; + } + + sp->EOC = FALSE; /* Clean out this flag */ + + if (ccb->status == LOCKED || ccb->status == RESET) { + printk("eata_dma: int_handler, reseted command pid %ld returned" + "\n", cmd->pid); + DBG(DBG_INTR && DBG_DELAY, DELAY(1)); + } + + eata_stat = inb(base + HA_RSTATUS); + DBG(DBG_INTR, printk("IRQ %d received, base %#.4x, pid %ld, " + "target: %x, lun: %x, ea_s: %#.2x, hba_s: " + "%#.2x \n", irq, base, cmd->pid, cmd->target, + cmd->lun, eata_stat, hba_stat)); + + switch (hba_stat) { + case HA_NO_ERROR: /* NO Error */ + if(HD(cmd)->do_latency == TRUE && ccb->timestamp) + eata_latency_in(ccb, HD(cmd)); + result = DID_OK << 16; + break; + case HA_ERR_SEL_TO: /* Selection Timeout */ + case HA_ERR_CMD_TO: /* Command Timeout */ + result = DID_TIME_OUT << 16; + break; + case HA_BUS_RESET: /* SCSI Bus Reset Received */ + result = DID_RESET << 16; + DBG(DBG_STATUS, printk(KERN_WARNING "scsi%d: BUS RESET " + "received on cmd %ld\n", + HD(cmd)->HBA_number, cmd->pid)); + break; + case HA_INIT_POWERUP: /* Initial Controller Power-up */ + if (cmd->device->type != TYPE_TAPE) + result = DID_BUS_BUSY << 16; + else + result = DID_ERROR << 16; + + for (i = 0; i < MAXTARGET; i++) + DBG(DBG_STATUS, printk(KERN_DEBUG "scsi%d: cmd pid %ld " + "returned with INIT_POWERUP\n", + HD(cmd)->HBA_number, cmd->pid)); + break; + case HA_CP_ABORT_NA: + case HA_CP_ABORTED: + result = DID_ABORT << 16; + DBG(DBG_STATUS, printk(KERN_WARNING "scsi%d: aborted cmd " + "returned\n", HD(cmd)->HBA_number)); + break; + case HA_CP_RESET_NA: + case HA_CP_RESET: + HD(cmd)->resetlevel[cmd->channel] = 0; + result = DID_RESET << 16; + DBG(DBG_STATUS, printk(KERN_WARNING "scsi%d: reseted cmd " + "pid %ldreturned\n", + HD(cmd)->HBA_number, cmd->pid)); + case HA_SCSI_HUNG: /* SCSI Hung */ + printk(KERN_ERR "scsi%d: SCSI hung\n", HD(cmd)->HBA_number); + result = DID_ERROR << 16; + break; + case HA_RSENSE_FAIL: /* Auto Request-Sense Failed */ + DBG(DBG_STATUS, printk(KERN_ERR "scsi%d: Auto Request Sense " + "Failed\n", HD(cmd)->HBA_number)); + result = DID_ERROR << 16; + break; + case HA_UNX_BUSPHASE: /* Unexpected Bus Phase */ + case HA_UNX_BUS_FREE: /* Unexpected Bus Free */ + case HA_BUS_PARITY: /* Bus Parity Error */ + case HA_UNX_MSGRJCT: /* Unexpected Message Reject */ + case HA_RESET_STUCK: /* SCSI Bus Reset Stuck */ + case HA_PARITY_ERR: /* Controller Ram Parity */ + default: + result = DID_ERROR << 16; + break; + } + cmd->result = result | (scsi_stat << 1); + +#if DBG_INTR2 + if (scsi_stat || result || hba_stat || eata_stat != 0x50 + || cmd->scsi_done == NULL || cmd->device->id == 7) + printk("HBA: %d, channel %d, id: %d, lun %d, pid %ld:\n" + "eata_stat %#x, hba_stat %#.2x, scsi_stat %#.2x, " + "sense_key: %#x, result: %#.8x\n", x, + cmd->device->channel, cmd->device->id, cmd->device->lun, + cmd->pid, eata_stat, hba_stat, scsi_stat, + cmd->sense_buffer[2] & 0xf, cmd->result); + DBG(DBG_INTR&&DBG_DELAY,DELAY(1)); +#endif + + ccb->status = FREE; /* now we can release the slot */ + cmd->scsi_done(cmd); + } + } + + return; +} + +inline int eata_send_command(u32 addr, u32 base, u8 command) +{ + long loop = R_LIMIT; + + while (inb(base + HA_RAUXSTAT) & HA_ABUSY) + if (--loop == 0) + return(FALSE); + + if(addr != (u32) NULL) + addr = virt_to_bus((void *)addr); + + /* + * This is overkill.....but the MIPSen seem to need this + * and it will be optimized away for i86 and ALPHA machines. + */ + flush_cache_all(); + + /* And now the address in nice little byte chunks */ +#ifdef __LITTLE_ENDIAN + outb(addr, base + HA_WDMAADDR); + outb(addr >> 8, base + HA_WDMAADDR + 1); + outb(addr >> 16, base + HA_WDMAADDR + 2); + outb(addr >> 24, base + HA_WDMAADDR + 3); +#else + outb(addr >> 24, base + HA_WDMAADDR); + outb(addr >> 16, base + HA_WDMAADDR + 1); + outb(addr >> 8, base + HA_WDMAADDR + 2); + outb(addr, base + HA_WDMAADDR + 3); +#endif + outb(command, base + HA_WCOMMAND); + return(TRUE); +} + +inline int eata_send_immediate(u32 base, u32 addr, u8 ifc, u8 code, u8 code2) +{ + if(addr != (u32) NULL) + addr = virt_to_bus((void *)addr); + + /* + * This is overkill.....but the MIPSen seem to need this + * and it will be optimized away for i86 and ALPHA machines. + */ + flush_cache_all(); + + outb(0x0, base + HA_WDMAADDR - 1); + if(addr){ +#ifdef __LITTLE_ENDIAN + outb(addr, base + HA_WDMAADDR); + outb(addr >> 8, base + HA_WDMAADDR + 1); + outb(addr >> 16, base + HA_WDMAADDR + 2); + outb(addr >> 24, base + HA_WDMAADDR + 3); +#else + outb(addr >> 24, base + HA_WDMAADDR); + outb(addr >> 16, base + HA_WDMAADDR + 1); + outb(addr >> 8, base + HA_WDMAADDR + 2); + outb(addr, base + HA_WDMAADDR + 3); +#endif + } else { + outb(0x0, base + HA_WDMAADDR); + outb(0x0, base + HA_WDMAADDR + 1); + outb(code2, base + HA_WCODE2); + outb(code, base + HA_WCODE); + } + + outb(ifc, base + HA_WIFC); + outb(EATA_CMD_IMMEDIATE, base + HA_WCOMMAND); + return(TRUE); +} + +int eata_queue(Scsi_Cmnd * cmd, void (* done) (Scsi_Cmnd *)) +{ + unsigned int i, x, y; + ulong flags; + hostdata *hd; + struct Scsi_Host *sh; + struct eata_ccb *ccb; + struct scatterlist *sl; + + + save_flags(flags); + cli(); + +#if 0 + for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->next) { + if(inb((uint)sh->base + HA_RAUXSTAT) & HA_AIRQ) { + printk("eata_dma: scsi%d interrupt pending in eata_queue.\n" + " Calling interrupt handler.\n", sh->host_no); + eata_int_handler(sh->irq, 0, 0); + } + } +#endif + + queue_counter++; + + hd = HD(cmd); + sh = cmd->host; + + if (cmd->cmnd[0] == REQUEST_SENSE && cmd->sense_buffer[0] != 0) { + DBG(DBG_REQSENSE, printk(KERN_DEBUG "Tried to REQUEST SENSE\n")); + cmd->result = DID_OK << 16; + done(cmd); + + return(0); + } + + /* check for free slot */ + for (y = hd->last_ccb + 1, x = 0; x < sh->can_queue; x++, y++) { + if (y >= sh->can_queue) + y = 0; + if (hd->ccb[y].status == FREE) + break; + } + + hd->last_ccb = y; + + if (x >= sh->can_queue) { + cmd->result = DID_BUS_BUSY << 16; + DBG(DBG_QUEUE && DBG_ABNORM, + printk(KERN_CRIT "eata_queue pid %ld, HBA QUEUE FULL..., " + "returning DID_BUS_BUSY\n", cmd->pid)); + done(cmd); + restore_flags(flags); + return(0); + } + ccb = &hd->ccb[y]; + + memset(ccb, 0, sizeof(struct eata_ccb) - sizeof(struct eata_sg_list *)); + + ccb->status = USED; /* claim free slot */ + + restore_flags(flags); + + DBG(DBG_QUEUE, printk("eata_queue pid %ld, target: %x, lun: %x, y %d\n", + cmd->pid, cmd->target, cmd->lun, y)); + DBG(DBG_QUEUE && DBG_DELAY, DELAY(1)); + + if(hd->do_latency == TRUE) + eata_latency_out(ccb, cmd); + + cmd->scsi_done = (void *)done; + + switch (cmd->cmnd[0]) { + case CHANGE_DEFINITION: case COMPARE: case COPY: + case COPY_VERIFY: case LOG_SELECT: case MODE_SELECT: + case MODE_SELECT_10: case SEND_DIAGNOSTIC: case WRITE_BUFFER: + case FORMAT_UNIT: case REASSIGN_BLOCKS: case RESERVE: + case SEARCH_EQUAL: case SEARCH_HIGH: case SEARCH_LOW: + case WRITE_6: case WRITE_10: case WRITE_VERIFY: + case UPDATE_BLOCK: case WRITE_LONG: case WRITE_SAME: + case SEARCH_HIGH_12: case SEARCH_EQUAL_12: case SEARCH_LOW_12: + case WRITE_12: case WRITE_VERIFY_12: case SET_WINDOW: + case MEDIUM_SCAN: case SEND_VOLUME_TAG: + case 0xea: /* alternate number for WRITE LONG */ + ccb->DataOut = TRUE; /* Output mode */ + break; + case TEST_UNIT_READY: + default: + ccb->DataIn = TRUE; /* Input mode */ + } + + /* FIXME: This will have to be changed once the midlevel driver + * allows different HBA IDs on every channel. + */ + if (cmd->target == sh->this_id) + ccb->Interpret = TRUE; /* Interpret command */ + + if (cmd->use_sg) { + ccb->scatter = TRUE; /* SG mode */ + if (ccb->sg_list == NULL) { + ccb->sg_list = kmalloc(sh->sg_tablesize * sizeof(struct eata_sg_list), + GFP_ATOMIC | GFP_DMA); + } + if (ccb->sg_list == NULL) + panic("eata_dma: Run out of DMA memory for SG lists !\n"); + ccb->cp_dataDMA = htonl(virt_to_bus(ccb->sg_list)); + + ccb->cp_datalen = htonl(cmd->use_sg * sizeof(struct eata_sg_list)); + sl=(struct scatterlist *)cmd->request_buffer; + for(i = 0; i < cmd->use_sg; i++, sl++){ + ccb->sg_list[i].data = htonl(virt_to_bus(sl->address)); + ccb->sg_list[i].len = htonl((u32) sl->length); + } + } else { + ccb->scatter = FALSE; + ccb->cp_datalen = htonl(cmd->request_bufflen); + ccb->cp_dataDMA = htonl(virt_to_bus(cmd->request_buffer)); + } + + ccb->Auto_Req_Sen = TRUE; + ccb->cp_reqDMA = htonl(virt_to_bus(cmd->sense_buffer)); + ccb->reqlen = sizeof(cmd->sense_buffer); + + ccb->cp_id = cmd->target; + ccb->cp_channel = cmd->channel; + ccb->cp_lun = cmd->lun; + ccb->cp_dispri = TRUE; + ccb->cp_identify = TRUE; + memcpy(ccb->cp_cdb, cmd->cmnd, cmd->cmd_len); + + ccb->cp_statDMA = htonl(virt_to_bus(&(hd->sp))); + + ccb->cp_viraddr = ccb; /* This will be passed thru, so we don't need to + * convert it */ + ccb->cmd = cmd; + cmd->host_scribble = (char *)&hd->ccb[y]; + + if(eata_send_command((u32) ccb, (u32) sh->base, EATA_CMD_DMA_SEND_CP) == FALSE) { + cmd->result = DID_BUS_BUSY << 16; + DBG(DBG_QUEUE && DBG_ABNORM, + printk("eata_queue target %d, pid %ld, HBA busy, " + "returning DID_BUS_BUSY\n",cmd->target, cmd->pid)); + ccb->status = FREE; + done(cmd); + return(0); + } + DBG(DBG_QUEUE, printk("Queued base %#.4x pid: %ld target: %x lun: %x " + "slot %d irq %d\n", (s32)sh->base, cmd->pid, + cmd->target, cmd->lun, y, sh->irq)); + DBG(DBG_QUEUE && DBG_DELAY, DELAY(1)); + + return(0); +} + + +int eata_abort(Scsi_Cmnd * cmd) +{ + ulong loop = HZ / 2; + ulong flags; + int x; + struct Scsi_Host *sh; + + save_flags(flags); + cli(); + + DBG(DBG_ABNORM, printk("eata_abort called pid: %ld target: %x lun: %x" + " reason %x\n", cmd->pid, cmd->target, cmd->lun, + cmd->abort_reason)); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + + /* Some interrupt controllers seem to loose interrupts */ + for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->next) { + if(inb((uint)sh->base + HA_RAUXSTAT) & HA_AIRQ) { + printk("eata_dma: scsi%d interrupt pending in eata_abort.\n" + " Calling interrupt handler.\n", sh->host_no); + eata_int_handler(sh->irq, 0, 0); + } + } + + while (inb((u32)(cmd->host->base) + HA_RAUXSTAT) & HA_ABUSY) { + if (--loop == 0) { + printk("eata_dma: abort, timeout error.\n"); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + restore_flags(flags); + return (SCSI_ABORT_ERROR); + } + } + if (CD(cmd)->status == RESET) { + printk("eata_dma: abort, command reset error.\n"); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + restore_flags(flags); + return (SCSI_ABORT_ERROR); + } + if (CD(cmd)->status == LOCKED) { + DBG(DBG_ABNORM, printk("eata_dma: abort, queue slot locked.\n")); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + restore_flags(flags); + return (SCSI_ABORT_NOT_RUNNING); + } + if (CD(cmd)->status == USED) { + DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_BUSY\n")); + restore_flags(flags); + return (SCSI_ABORT_BUSY); /* SNOOZE */ + } + if (CD(cmd)->status == FREE) { + DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_NOT_RUNNING\n")); + restore_flags(flags); + return (SCSI_ABORT_NOT_RUNNING); + } + restore_flags(flags); + panic("eata_dma: abort: invalid slot status\n"); +} + +int eata_reset(Scsi_Cmnd * cmd, unsigned int resetflags) +{ + uint x; + ulong loop = loops_per_sec / 3; + ulong flags; + unchar success = FALSE; + Scsi_Cmnd *sp; + struct Scsi_Host *sh; + + save_flags(flags); + cli(); + + DBG(DBG_ABNORM, printk("eata_reset called pid:%ld target: %x lun: %x" + " reason %x\n", cmd->pid, cmd->target, cmd->lun, + cmd->abort_reason)); + + for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->next) { + if(inb((uint)sh->base + HA_RAUXSTAT) & HA_AIRQ) { + printk("eata_dma: scsi%d interrupt pending in eata_reset.\n" + " Calling interrupt handler.\n", sh->host_no); + eata_int_handler(sh->irq, 0, 0); + } + } + + if (HD(cmd)->state == RESET) { + printk("eata_reset: exit, already in reset.\n"); + restore_flags(flags); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + return (SCSI_RESET_ERROR); + } + + while (inb((u32)(cmd->host->base) + HA_RAUXSTAT) & HA_ABUSY) + if (--loop == 0) { + printk("eata_reset: exit, timeout error.\n"); + restore_flags(flags); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + return (SCSI_RESET_ERROR); + } + + for (x = 0; x < cmd->host->can_queue; x++) { + if (HD(cmd)->ccb[x].status == FREE) + continue; + + if (HD(cmd)->ccb[x].status == LOCKED) { + HD(cmd)->ccb[x].status = FREE; + printk("eata_reset: locked slot %d forced free.\n", x); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + continue; + } + + + sp = HD(cmd)->ccb[x].cmd; + HD(cmd)->ccb[x].status = RESET; + + if (sp == NULL) + panic("eata_reset: slot %d, sp==NULL.\n", x); + + printk("eata_reset: slot %d in reset, pid %ld.\n", x, sp->pid); + + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + + if (sp == cmd) + success = TRUE; + } + + /* hard reset the HBA */ + inb((u32) (cmd->host->base) + HA_RSTATUS); /* This might cause trouble */ + eata_send_command(0, (u32) cmd->host->base, EATA_CMD_RESET); + + HD(cmd)->state = RESET; + + DBG(DBG_ABNORM, printk("eata_reset: board reset done, enabling " + "interrupts.\n")); + + DELAY(2); /* In theorie we should get interrupts and set free all + * used queueslots */ + + DBG(DBG_ABNORM, printk("eata_reset: interrupts disabled again.\n")); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + + for (x = 0; x < cmd->host->can_queue; x++) { + + /* Skip slots already set free by interrupt and those that + * are still LOCKED from the last reset */ + if (HD(cmd)->ccb[x].status != RESET) + continue; + + sp = HD(cmd)->ccb[x].cmd; + sp->result = DID_RESET << 16; + + /* This mailbox is still waiting for its interrupt */ + HD(cmd)->ccb[x].status = LOCKED; + + printk("eata_reset: slot %d locked, DID_RESET, pid %ld done.\n", + x, sp->pid); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + + sp->scsi_done(sp); + } + + HD(cmd)->state = FALSE; + restore_flags(flags); + + if (success) { + DBG(DBG_ABNORM, printk("eata_reset: exit, pending.\n")); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + return (SCSI_RESET_PENDING); + } else { + DBG(DBG_ABNORM, printk("eata_reset: exit, wakeup.\n")); + DBG(DBG_ABNORM && DBG_DELAY, DELAY(1)); + return (SCSI_RESET_PUNT); + } +} + +/* Here we try to determine the optimum queue depth for + * each attached device. + * + * At the moment the algorithm is rather simple + */ +static void eata_select_queue_depths(struct Scsi_Host *host, + Scsi_Device *devicelist) +{ + Scsi_Device *device; + int devcount = 0; + int factor = 0; + +#if CRIPPLE_QUEUE + for(device = devicelist; device != NULL; device = device->next) { + if(device->host == host) + device->queue_depth = 2; + } +#else + /* First we do a sample run go find out what we have */ + for(device = devicelist; device != NULL; device = device->next) { + if (device->host == host) { + devcount++; + switch(device->type) { + case TYPE_DISK: + case TYPE_MOD: + factor += TYPE_DISK_QUEUE; + break; + case TYPE_TAPE: + factor += TYPE_TAPE_QUEUE; + break; + case TYPE_WORM: + case TYPE_ROM: + factor += TYPE_ROM_QUEUE; + break; + case TYPE_PROCESSOR: + case TYPE_SCANNER: + default: + factor += TYPE_OTHER_QUEUE; + break; + } + } + } + + DBG(DBG_REGISTER, printk(KERN_DEBUG "scsi%d: needed queueslots %d\n", + host->host_no, factor)); + + if(factor == 0) /* We don't want to get a DIV BY ZERO error */ + factor = 1; + + factor = (SD(host)->queuesize * 10) / factor; + + DBG(DBG_REGISTER, printk(KERN_DEBUG "scsi%d: using factor %dE-1\n", + host->host_no, factor)); + + /* Now that have the factor we can set the individual queuesizes */ + for(device = devicelist; device != NULL; device = device->next) { + if(device->host == host) { + if(SD(device->host)->bustype != IS_ISA){ + switch(device->type) { + case TYPE_DISK: + case TYPE_MOD: + device->queue_depth = (TYPE_DISK_QUEUE * factor) / 10; + break; + case TYPE_TAPE: + device->queue_depth = (TYPE_TAPE_QUEUE * factor) / 10; + break; + case TYPE_WORM: + case TYPE_ROM: + device->queue_depth = (TYPE_ROM_QUEUE * factor) / 10; + break; + case TYPE_PROCESSOR: + case TYPE_SCANNER: + default: + device->queue_depth = (TYPE_OTHER_QUEUE * factor) / 10; + break; + } + } else /* ISA forces us to limit the queue depth because of the + * bounce buffer memory overhead. I know this is cruel */ + device->queue_depth = 2; + + /* + * It showed that we need to set an upper limit of commands + * we can allow to queue for a single device on the bus. + * If we get above that limit, the broken midlevel SCSI code + * will produce bogus timeouts and aborts en masse. :-( + */ + if(device->queue_depth > UPPER_DEVICE_QUEUE_LIMIT) + device->queue_depth = UPPER_DEVICE_QUEUE_LIMIT; + if(device->queue_depth == 0) + device->queue_depth = 1; + + printk(KERN_INFO "scsi%d: queue depth for target %d on channel %d " + "set to %d\n", host->host_no, device->id, device->channel, + device->queue_depth); + } + } +#endif +} + +#if CHECK_BLINK +int check_blink_state(long base) +{ + ushort loops = 10; + u32 blinkindicator; + u32 state = 0x12345678; + u32 oldstate = 0; + + blinkindicator = htonl(0x54504442); + while ((loops--) && (state != oldstate)) { + oldstate = state; + state = inl((uint) base + 1); + } + + DBG(DBG_BLINK, printk("Did Blink check. Status: %d\n", + (state == oldstate) && (state == blinkindicator))); + + if ((state == oldstate) && (state == blinkindicator)) + return(TRUE); + else + return (FALSE); +} +#endif + +char * get_board_data(u32 base, u32 irq, u32 id) +{ + struct eata_ccb *cp; + struct eata_sp *sp; + static char *buff; + ulong i; + + cp = (struct eata_ccb *) scsi_init_malloc(sizeof(struct eata_ccb), + GFP_ATOMIC | GFP_DMA); + sp = (struct eata_sp *) scsi_init_malloc(sizeof(struct eata_sp), + GFP_ATOMIC | GFP_DMA); + + buff = dma_scratch; + + memset(cp, 0, sizeof(struct eata_ccb)); + memset(sp, 0, sizeof(struct eata_sp)); + memset(buff, 0, 256); + + cp->DataIn = TRUE; + cp->Interpret = TRUE; /* Interpret command */ + cp->cp_dispri = TRUE; + cp->cp_identify = TRUE; + + cp->cp_datalen = htonl(56); + cp->cp_dataDMA = htonl(virt_to_bus(buff)); + cp->cp_statDMA = htonl(virt_to_bus(sp)); + cp->cp_viraddr = cp; + + cp->cp_id = id; + cp->cp_lun = 0; + + cp->cp_cdb[0] = INQUIRY; + cp->cp_cdb[1] = 0; + cp->cp_cdb[2] = 0; + cp->cp_cdb[3] = 0; + cp->cp_cdb[4] = 56; + cp->cp_cdb[5] = 0; + + fake_int_base = (struct eata_register *) base; + fake_int_result = FALSE; + fake_int_happened = FALSE; + + eata_send_command((u32) cp, (u32) base, EATA_CMD_DMA_SEND_CP); + + i = jiffies + (3 * HZ); + while (fake_int_happened == FALSE && jiffies <= i) + barrier(); + + DBG(DBG_INTR3, printk(KERN_DEBUG "fake_int_result: %#x hbastat %#x " + "scsistat %#x, buff %p sp %p\n", + fake_int_result, (u32) (sp->hba_stat /*& 0x7f*/), + (u32) sp->scsi_stat, buff, sp)); + + scsi_init_free((void *)cp, sizeof(struct eata_ccb)); + scsi_init_free((void *)sp, sizeof(struct eata_sp)); + + if ((fake_int_result & HA_SERROR) || jiffies > i){ + printk(KERN_WARNING "eata_dma: trying to reset HBA at %x to clear " + "possible blink state\n", base); + /* hard reset the HBA */ + inb((u32) (base) + HA_RSTATUS); + eata_send_command(0, base, EATA_CMD_RESET); + DELAY(1); + return (NULL); + } else + return (buff); +} + + +int get_conf_PIO(u32 base, struct get_conf *buf) +{ + ulong loop = R_LIMIT; + u16 *p; + + if(check_region(base, 9)) + return (FALSE); + + memset(buf, 0, sizeof(struct get_conf)); + + while (inb(base + HA_RSTATUS) & HA_SBUSY) + if (--loop == 0) + return (FALSE); + + fake_int_base = (struct eata_register *) base; + fake_int_result = FALSE; + fake_int_happened = FALSE; + + DBG(DBG_PIO && DBG_PROBE, + printk("Issuing PIO READ CONFIG to HBA at %#x\n", base)); + eata_send_command(0, base, EATA_CMD_PIO_READ_CONFIG); + + loop = R_LIMIT; + for (p = (u16 *) buf; + (long)p <= ((long)buf + (sizeof(struct get_conf) / 2)); p++) { + while (!(inb(base + HA_RSTATUS) & HA_SDRQ)) + if (--loop == 0) + return (FALSE); + + loop = R_LIMIT; + *p = inw(base + HA_RDATA); + } + + if (!(inb(base + HA_RSTATUS) & HA_SERROR)) { /* Error ? */ + if (htonl(EATA_SIGNATURE) == buf->signature) { + DBG(DBG_PIO&&DBG_PROBE, printk("EATA Controller found at %x " + "EATA Level: %x\n", (uint) base, + (uint) (buf->version))); + + while (inb(base + HA_RSTATUS) & HA_SDRQ) + inw(base + HA_RDATA); + return (TRUE); + } + } else { + DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer " + "for HBA at %lx\n", (long)base)); + } + return (FALSE); +} + + +void print_config(struct get_conf *gc) +{ + printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d DMAS:%d\n", + (u32) ntohl(gc->len), gc->version, + gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support, + gc->DMA_support); + printk("DMAV:%d HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", + gc->DMA_valid, gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], + gc->scsi_id[1], ntohs(gc->queuesiz), ntohs(gc->SGsiz), gc->SECOND); + printk("IRQ:%d IRQT:%d DMAC:%d FORCADR:%d SG_64K:%d SG_UAE:%d MID:%d " + "MCH:%d MLUN:%d\n", + gc->IRQ, gc->IRQ_TR, (8 - gc->DMA_channel) & 7, gc->FORCADR, + gc->SG_64K, gc->SG_UAE, gc->MAX_ID, gc->MAX_CHAN, gc->MAX_LUN); + printk("RIDQ:%d PCI:%d EISA:%d\n", + gc->ID_qest, gc->is_PCI, gc->is_EISA); + DBG(DPT_DEBUG, DELAY(14)); +} + +short register_HBA(u32 base, struct get_conf *gc, Scsi_Host_Template * tpnt, + u8 bustype) +{ + ulong size = 0; + unchar dma_channel = 0; + char *buff = 0; + unchar bugs = 0; + struct Scsi_Host *sh; + hostdata *hd; + int x; + + + DBG(DBG_REGISTER, print_config(gc)); + + if (gc->DMA_support == FALSE) { + printk("The EATA HBA at %#.4x does not support DMA.\n" + "Please use the EATA-PIO driver.\n", base); + return (FALSE); + } + if(gc->HAA_valid == FALSE || ntohl(gc->len) < 0x22) + gc->MAX_CHAN = 0; + + if (reg_IRQ[gc->IRQ] == FALSE) { /* Interrupt already registered ? */ + if (!request_irq(gc->IRQ, (void *) eata_fake_int_handler, SA_INTERRUPT, + "eata_dma", NULL)){ + reg_IRQ[gc->IRQ]++; + if (!gc->IRQ_TR) + reg_IRQL[gc->IRQ] = TRUE; /* IRQ is edge triggered */ + } else { + printk("Couldn't allocate IRQ %d, Sorry.", gc->IRQ); + return (FALSE); + } + } else { /* More than one HBA on this IRQ */ + if (reg_IRQL[gc->IRQ] == TRUE) { + printk("Can't support more than one HBA on this IRQ,\n" + " if the IRQ is edge triggered. Sorry.\n"); + return (FALSE); + } else + reg_IRQ[gc->IRQ]++; + } + + + /* If DMA is supported but DMA_valid isn't set to indicate that + * the channel number is given we must have pre 2.0 firmware (1.7?) + * which leaves us to guess since the "newer ones" also don't set the + * DMA_valid bit. + */ + if (gc->DMA_support && !gc->DMA_valid && gc->DMA_channel) { + printk(KERN_WARNING "eata_dma: If you are using a pre 2.0 firmware " + "please update it !\n" + " You can get new firmware releases from ftp.dpt.com\n"); + gc->DMA_channel = (base == 0x1f0 ? 3 /* DMA=5 */ : 2 /* DMA=6 */); + gc->DMA_valid = TRUE; + } + + /* if gc->DMA_valid it must be an ISA HBA and we have to register it */ + dma_channel = BUSMASTER; + if (gc->DMA_valid) { + if (request_dma(dma_channel = (8 - gc->DMA_channel) & 7, "eata_dma")) { + printk(KERN_WARNING "Unable to allocate DMA channel %d for ISA HBA" + " at %#.4x.\n", dma_channel, base); + reg_IRQ[gc->IRQ]--; + if (reg_IRQ[gc->IRQ] == 0) + free_irq(gc->IRQ, NULL); + if (gc->IRQ_TR == FALSE) + reg_IRQL[gc->IRQ] = FALSE; + return (FALSE); + } + } + + if (dma_channel != BUSMASTER) { + disable_dma(dma_channel); + clear_dma_ff(dma_channel); + set_dma_mode(dma_channel, DMA_MODE_CASCADE); + enable_dma(dma_channel); + } + + if (bustype != IS_EISA && bustype != IS_ISA) + buff = get_board_data(base, gc->IRQ, gc->scsi_id[3]); + + if (buff == NULL) { + if (bustype == IS_EISA || bustype == IS_ISA) { + bugs = bugs || BROKEN_INQUIRY; + } else { + if (gc->DMA_support == FALSE) + printk(KERN_WARNING "HBA at %#.4x doesn't support DMA. " + "Sorry\n", base); + else + printk(KERN_WARNING "HBA at %#.4x does not react on INQUIRY. " + "Sorry.\n", base); + if (gc->DMA_valid) + free_dma(dma_channel); + reg_IRQ[gc->IRQ]--; + if (reg_IRQ[gc->IRQ] == 0) + free_irq(gc->IRQ, NULL); + if (gc->IRQ_TR == FALSE) + reg_IRQL[gc->IRQ] = FALSE; + return (FALSE); + } + } + + if (gc->DMA_support == FALSE && buff != NULL) + printk(KERN_WARNING "HBA %.12sat %#.4x doesn't set the DMA_support " + "flag correctly.\n", &buff[16], base); + + request_region(base, 9, "eata_dma"); /* We already checked the + * availability, so this + * should not fail. + */ + + if(ntohs(gc->queuesiz) == 0) { + gc->queuesiz = ntohs(64); + printk(KERN_WARNING "Warning: Queue size has to be corrected. Assuming" + " 64 queueslots\n" + " This might be a PM2012B with a defective Firmware\n" + " Contact DPT support@dpt.com for an upgrade\n"); + } + + size = sizeof(hostdata) + ((sizeof(struct eata_ccb) + sizeof(long)) + * ntohs(gc->queuesiz)); + + DBG(DBG_REGISTER, printk("scsi_register size: %ld\n", size)); + + sh = scsi_register(tpnt, size); + + if(sh != NULL) { + + hd = SD(sh); + + memset(hd->reads, 0, sizeof(u32) * 26); + + sh->select_queue_depths = eata_select_queue_depths; + + hd->bustype = bustype; + + /* + * If we are using a ISA board, we can't use extended SG, + * because we would need excessive amounts of memory for + * bounce buffers. + */ + if (gc->SG_64K==TRUE && ntohs(gc->SGsiz)==64 && hd->bustype!=IS_ISA){ + sh->sg_tablesize = SG_SIZE_BIG; + } else { + sh->sg_tablesize = ntohs(gc->SGsiz); + if (sh->sg_tablesize > SG_SIZE || sh->sg_tablesize == 0) { + if (sh->sg_tablesize == 0) + printk(KERN_WARNING "Warning: SG size had to be fixed.\n" + "This might be a PM2012 with a defective Firmware" + "\nContact DPT support@dpt.com for an upgrade\n"); + sh->sg_tablesize = SG_SIZE; + } + } + hd->sgsize = sh->sg_tablesize; + } + + if(sh != NULL) { + sh->can_queue = hd->queuesize = ntohs(gc->queuesiz); + sh->cmd_per_lun = 0; + } + + if(sh == NULL) { + DBG(DBG_REGISTER, printk(KERN_NOTICE "eata_dma: couldn't register HBA" + " at%x \n", base)); + scsi_unregister(sh); + if (gc->DMA_valid) + free_dma(dma_channel); + + reg_IRQ[gc->IRQ]--; + if (reg_IRQ[gc->IRQ] == 0) + free_irq(gc->IRQ, NULL); + if (gc->IRQ_TR == FALSE) + reg_IRQL[gc->IRQ] = FALSE; + return (FALSE); + } + + + hd->broken_INQUIRY = (bugs & BROKEN_INQUIRY); + + if(hd->broken_INQUIRY == TRUE) { + strcpy(hd->vendor, "DPT"); + strcpy(hd->name, "??????????"); + strcpy(hd->revision, "???.?"); + hd->firmware_revision = 0; + } else { + strncpy(hd->vendor, &buff[8], 8); + hd->vendor[8] = 0; + strncpy(hd->name, &buff[16], 17); + hd->name[17] = 0; + hd->revision[0] = buff[32]; + hd->revision[1] = buff[33]; + hd->revision[2] = buff[34]; + hd->revision[3] = '.'; + hd->revision[4] = buff[35]; + hd->revision[5] = 0; + hd->firmware_revision = (buff[32] << 24) + (buff[33] << 16) + + (buff[34] << 8) + buff[35]; + } + + if (hd->firmware_revision >= (('0'<<24) + ('7'<<16) + ('G'<< 8) + '0')) + hd->immediate_support = 1; + else + hd->immediate_support = 0; + + switch (ntohl(gc->len)) { + case 0x1c: + hd->EATA_revision = 'a'; + break; + case 0x1e: + hd->EATA_revision = 'b'; + break; + case 0x22: + hd->EATA_revision = 'c'; + break; + case 0x24: + hd->EATA_revision = 'z'; + default: + hd->EATA_revision = '?'; + } + + + if(ntohl(gc->len) >= 0x22) { + sh->max_id = gc->MAX_ID + 1; + sh->max_lun = gc->MAX_LUN + 1; + } else { + sh->max_id = 8; + sh->max_lun = 8; + } + + hd->HBA_number = sh->host_no; + hd->channel = gc->MAX_CHAN; + sh->max_channel = gc->MAX_CHAN; + sh->unique_id = base; + sh->base = (char *) base; + sh->io_port = base; + sh->n_io_port = 9; + sh->irq = gc->IRQ; + sh->dma_channel = dma_channel; + + /* FIXME: + * SCSI midlevel code should support different HBA ids on every channel + */ + sh->this_id = gc->scsi_id[3]; + + if (gc->SECOND) + hd->primary = FALSE; + else + hd->primary = TRUE; + + sh->wish_block = FALSE; + + if (hd->bustype != IS_ISA) { + sh->unchecked_isa_dma = FALSE; + } else { + sh->unchecked_isa_dma = TRUE; /* We're doing ISA DMA */ + } + + for(x = 0; x <= 11; x++){ /* Initialize min. latency */ + hd->writes_lat[x][1] = 0xffffffff; + hd->reads_lat[x][1] = 0xffffffff; + } + hd->all_lat[1] = 0xffffffff; + + hd->next = NULL; /* build a linked list of all HBAs */ + hd->prev = last_HBA; + if(hd->prev != NULL) + SD(hd->prev)->next = sh; + last_HBA = sh; + if (first_HBA == NULL) + first_HBA = sh; + registered_HBAs++; + + return (TRUE); +} + + + +void find_EISA(struct get_conf *buf, Scsi_Host_Template * tpnt) +{ + u32 base; + int i; + +#if CHECKPAL + u8 pal1, pal2, pal3; +#endif + + for (i = 0; i < MAXEISA; i++) { + if (EISAbases[i] == TRUE) { /* Still a possibility ? */ + + base = 0x1c88 + (i * 0x1000); +#if CHECKPAL + pal1 = inb((u16)base - 8); + pal2 = inb((u16)base - 7); + pal3 = inb((u16)base - 6); + + if (((pal1 == DPT_ID1) && (pal2 == DPT_ID2)) || + ((pal1 == NEC_ID1) && (pal2 == NEC_ID2) && (pal3 == NEC_ID3))|| + ((pal1 == ATT_ID1) && (pal2 == ATT_ID2) && (pal3 == ATT_ID3))){ + DBG(DBG_PROBE, printk("EISA EATA id tags found: %x %x %x \n", + (int)pal1, (int)pal2, (int)pal3)); +#endif + if (get_conf_PIO(base, buf) == TRUE) { + if (buf->IRQ) { + DBG(DBG_EISA, printk("Registering EISA HBA\n")); + register_HBA(base, buf, tpnt, IS_EISA); + } else + printk("eata_dma: No valid IRQ. HBA removed from list\n"); + } +#if CHECK_BLINK + else { + if (check_blink_state(base)) + printk("HBA is in BLINK state. Consult your HBAs " + "Manual to correct this.\n"); + } +#endif + /* Nothing found here so we take it from the list */ + EISAbases[i] = 0; +#if CHECKPAL + } +#endif + } + } + return; +} + +void find_ISA(struct get_conf *buf, Scsi_Host_Template * tpnt) +{ + int i; + + for (i = 0; i < MAXISA; i++) { + if (ISAbases[i]) { + if (get_conf_PIO(ISAbases[i],buf) == TRUE){ + DBG(DBG_ISA, printk("Registering ISA HBA\n")); + register_HBA(ISAbases[i], buf, tpnt, IS_ISA); + } +#if CHECK_BLINK + else { + if (check_blink_state(ISAbases[i])) + printk("HBA is in BLINK state. Consult your HBAs " + "Manual to correct this.\n"); + } +#endif + ISAbases[i] = 0; + } + } + return; +} + +void find_PCI(struct get_conf *buf, Scsi_Host_Template * tpnt) +{ + +#ifndef CONFIG_PCI + printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n"); +#else + + u8 pci_bus, pci_device_fn; + static s16 pci_index = 0; /* Device index to PCI BIOS calls */ + u32 base = 0; + u16 com_adr; + u16 rev_device; + u32 error, i, x; + u8 pal1, pal2, pal3; + + if (pcibios_present()) { + for (i = 0; i <= MAXPCI; ++i, ++pci_index) { + if (pcibios_find_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, + pci_index, &pci_bus, &pci_device_fn)) + break; + DBG(DBG_PROBE && DBG_PCI, + printk("eata_dma: find_PCI, HBA at bus %d, device %d," + " function %d, index %d\n", (s32)pci_bus, + (s32)((pci_device_fn & 0xf8) >> 3), + (s32)(pci_device_fn & 7), pci_index)); + + if (!(error = pcibios_read_config_word(pci_bus, pci_device_fn, + PCI_CLASS_DEVICE, &rev_device))) { + if (rev_device == PCI_CLASS_STORAGE_SCSI) { + if (!(error = pcibios_read_config_word(pci_bus, + pci_device_fn, PCI_COMMAND, + (u16 *) & com_adr))) { + if (!((com_adr & PCI_COMMAND_IO) && + (com_adr & PCI_COMMAND_MASTER))) { + printk("eata_dma: find_PCI, HBA has IO or" + " BUSMASTER mode disabled\n"); + continue; + } + } else + printk("eata_dma: find_PCI, error %x while reading " + "PCI_COMMAND\n", error); + } else + printk("eata_dma: find_PCI, DEVICECLASSID %x didn't match\n", + rev_device); + } else { + printk("eata_dma: find_PCI, error %x while reading " + "PCI_CLASS_BASE\n", + error); + continue; + } + + if (!(error = pcibios_read_config_dword(pci_bus, pci_device_fn, + PCI_BASE_ADDRESS_0, (int *) &base))){ + + /* Check if the address is valid */ + if (base & 0x01) { + base &= 0xfffffffe; + /* EISA tag there ? */ + pal1 = inb(base); + pal2 = inb(base + 1); + pal3 = inb(base + 2); + if (((pal1 == DPT_ID1) && (pal2 == DPT_ID2)) || + ((pal1 == NEC_ID1) && (pal2 == NEC_ID2) && + (pal3 == NEC_ID3)) || + ((pal1 == ATT_ID1) && (pal2 == ATT_ID2) && + (pal3 == ATT_ID3))) + base += 0x08; + else + base += 0x10; /* Now, THIS is the real address */ + + if (base != 0x1f8) { + /* We didn't find it in the primary search */ + if (get_conf_PIO(base, buf) == TRUE) { + + /* OK. We made it till here, so we can go now + * and register it. We only have to check and + * eventually remove it from the EISA and ISA list + */ + DBG(DBG_PCI, printk("Registering PCI HBA\n")); + register_HBA(base, buf, tpnt, IS_PCI); + + if (base < 0x1000) { + for (x = 0; x < MAXISA; ++x) { + if (ISAbases[x] == base) { + ISAbases[x] = 0; + break; + } + } + } else if ((base & 0x0fff) == 0x0c88) + EISAbases[(base >> 12) & 0x0f] = 0; + continue; /* break; */ + } +#if CHECK_BLINK + else if (check_blink_state(base) == TRUE) { + printk("eata_dma: HBA is in BLINK state.\n" + "Consult your HBAs manual to correct this.\n"); + } +#endif + } + } + } else { + printk("eata_dma: error %x while reading " + "PCI_BASE_ADDRESS_0\n", error); + } + } + } else { + printk("eata_dma: No BIOS32 extensions present. This driver release " + "still depends on it.\n" + " Skipping scan for PCI HBAs. \n"); + } +#endif /* #ifndef CONFIG_PCI */ + return; +} + +int eata_detect(Scsi_Host_Template * tpnt) +{ + struct Scsi_Host *HBA_ptr; + struct get_conf gc; + int i; + + DBG((DBG_PROBE && DBG_DELAY) || DPT_DEBUG, + printk("Using lots of delays to let you read the debugging output\n")); + + tpnt->proc_dir = &proc_scsi_eata_dma; + + status = scsi_init_malloc(512, GFP_ATOMIC | GFP_DMA); + dma_scratch = scsi_init_malloc(1024, GFP_ATOMIC | GFP_DMA); + + if(status == NULL || dma_scratch == NULL) { + printk("eata_dma: can't allocate enough memory to probe for hosts !\n"); + return(0); + } + + dma_scratch += 4; + + find_PCI(&gc, tpnt); + + find_EISA(&gc, tpnt); + + find_ISA(&gc, tpnt); + + for (i = 0; i < MAXIRQ; i++) { /* Now that we know what we have, we */ + if (reg_IRQ[i] >= 1){ /* exchange the interrupt handler which */ + free_irq(i, NULL); /* we used for probing with the real one */ + request_irq(i, (void *)(eata_int_handler), SA_INTERRUPT|SA_SHIRQ, + "eata_dma", NULL); + } + } + + HBA_ptr = first_HBA; + + if (registered_HBAs != 0) { + printk("EATA (Extended Attachment) driver version: %d.%d%s" + "\ndeveloped in co-operation with DPT\n" + "(c) 1993-96 Michael Neuffer, mike@i-Connect.Net\n", + VER_MAJOR, VER_MINOR, VER_SUB); + printk("Registered HBAs:"); + printk("\nHBA no. Boardtype Revis EATA Bus BaseIO IRQ" + " DMA Ch ID Pr QS S/G IS\n"); + for (i = 1; i <= registered_HBAs; i++) { + printk("scsi%-2d: %.12s v%s 2.0%c %s %#.4x %2d", + HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision, + SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P')? + "PCI ":(SD(HBA_ptr)->bustype == 'E')?"EISA":"ISA ", + (u32) HBA_ptr->base, HBA_ptr->irq); + if(HBA_ptr->dma_channel != BUSMASTER) + printk(" %2x ", HBA_ptr->dma_channel); + else + printk(" %s", "BMST"); + printk(" %d %d %c %3d %3d %c\n", + SD(HBA_ptr)->channel+1, HBA_ptr->this_id, + (SD(HBA_ptr)->primary == TRUE)?'Y':'N', + HBA_ptr->can_queue, HBA_ptr->sg_tablesize, + (SD(HBA_ptr)->immediate_support == TRUE)?'Y':'N'); + HBA_ptr = SD(HBA_ptr)->next; + } + } else { + scsi_init_free((void *)status, 512); + } + + scsi_init_free((void *)dma_scratch - 4, 1024); + + DBG(DPT_DEBUG, DELAY(12)); + + return(registered_HBAs); +} + +#ifdef MODULE +/* Eventually this will go into an include file, but this will be later */ +Scsi_Host_Template driver_template = EATA_DMA; +#include "scsi_module.c" +#endif + +/* + * Overrides for Emacs so that we almost follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-indent-level: 4 + * c-brace-imaginary-offset: 0 + * c-brace-offset: -4 + * c-argdecl-indent: 4 + * c-label-offset: -4 + * c-continued-statement-offset: 4 + * c-continued-brace-offset: 0 + * tab-width: 8 + * End: + */ diff --git a/linux/dev/drivers/scsi/g_NCR5380.c b/linux/dev/drivers/scsi/g_NCR5380.c new file mode 100644 index 0000000..687dd36 --- /dev/null +++ b/linux/dev/drivers/scsi/g_NCR5380.c @@ -0,0 +1,735 @@ +/* + * Generic Generic NCR5380 driver + * + * Copyright 1993, Drew Eckhardt + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 440-4894 + * + * NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin + * K.Lentin@cs.monash.edu.au + * + * ALPHA RELEASE 1. + * + * For more information, please consult + * + * NCR 5380 Family + * SCSI Protocol Controller + * Databook + * + * NCR Microelectronics + * 1635 Aeroplaza Drive + * Colorado Springs, CO 80916 + * 1+ (719) 578-3400 + * 1+ (800) 334-5454 + */ + +/* + * TODO : flesh out DMA support, find some one actually using this (I have + * a memory mapped Trantor board that works fine) + */ + +/* + * Options : + * + * PARITY - enable parity checking. Not supported. + * + * SCSI2 - enable support for SCSI-II tagged queueing. Untested. + * + * USLEEP - enable support for devices that don't disconnect. Untested. + * + * The card is detected and initialized in one of several ways : + * 1. With command line overrides - NCR5380=port,irq may be + * used on the LILO command line to override the defaults. + * + * 2. With the GENERIC_NCR5380_OVERRIDE compile time define. This is + * specified as an array of address, irq, dma, board tuples. Ie, for + * one board at 0x350, IRQ5, no dma, I could say + * -DGENERIC_NCR5380_OVERRIDE={{0xcc000, 5, DMA_NONE, BOARD_NCR5380}} + * + * -1 should be specified for no or DMA interrupt, -2 to autoprobe for an + * IRQ line if overridden on the command line. + * + * 3. When included as a module, with arguments passed on the command line: + * ncr_irq=xx the interrupt + * ncr_addr=xx the port or base address (for port or memory + * mapped, resp.) + * ncr_dma=xx the DMA + * ncr_5380=1 to set up for a NCR5380 board + * ncr_53c400=1 to set up for a NCR53C400 board + * e.g. + * modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 + * for a port mapped NCR5380 board or + * modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 + * for a memory mapped NCR53C400 board with interrupts disabled. + * + * 255 should be specified for no or DMA interrupt, 254 to autoprobe for an + * IRQ line if overridden on the command line. + * + */ + +#ifdef MACH +#define GENERIC_NCR5380_OVERRIDE {{(NCR5380_map_type)0x350,5,0,BOARD_NCR53C400}}; +#define CONFIG_SCSI_GENERIC_NCR53C400 +#define CONFIG_SCSI_G_NCR5380_MEM +#endif + +#define AUTOPROBE_IRQ +#define AUTOSENSE + +#include <linux/config.h> + +#ifdef CONFIG_SCSI_GENERIC_NCR53C400 +#define NCR53C400_PSEUDO_DMA 1 +#define PSEUDO_DMA +#define NCR53C400 +#define NCR5380_STATS +#undef NCR5380_STAT_LIMIT +#endif +#if defined(CONFIG_SCSI_G_NCR5380_PORT) && defined(CONFIG_SCSI_G_NCR5380_MEM) +#error You can not configure the Generic NCR 5380 SCSI Driver for memory mapped I/O and port mapped I/O at the same time (yet) +#endif +#if !defined(CONFIG_SCSI_G_NCR5380_PORT) && !defined(CONFIG_SCSI_G_NCR5380_MEM) +#error You must configure the Generic NCR 5380 SCSI Driver for one of memory mapped I/O and port mapped I/O. +#endif + +#include <asm/system.h> +#include <asm/io.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/blk.h> +#include "scsi.h" +#include "hosts.h" +#include "g_NCR5380.h" +#include "NCR5380.h" +#include "constants.h" +#include "sd.h" +#include<linux/stat.h> + +struct proc_dir_entry proc_scsi_g_ncr5380 = { + PROC_SCSI_GENERIC_NCR5380, 9, "g_NCR5380", + S_IFDIR | S_IRUGO | S_IXUGO, 2 +}; + +#define NCR_NOT_SET 0 +static int ncr_irq=NCR_NOT_SET; +static int ncr_dma=NCR_NOT_SET; +static int ncr_addr=NCR_NOT_SET; +static int ncr_5380=NCR_NOT_SET; +static int ncr_53c400=NCR_NOT_SET; + +static struct override { + NCR5380_implementation_fields; + int irq; + int dma; + int board; /* Use NCR53c400, Ricoh, etc. extensions ? */ +} overrides +#ifdef GENERIC_NCR5380_OVERRIDE + [] = GENERIC_NCR5380_OVERRIDE +#else + [1] = {{0,},}; +#endif + +#define NO_OVERRIDES (sizeof(overrides) / sizeof(struct override)) + +/* + * Function : static internal_setup(int board, char *str, int *ints) + * + * Purpose : LILO command line initialization of the overrides array, + * + * Inputs : board - either BOARD_NCR5380 for a normal NCR5380 board, + * or BOARD_NCR53C400 for a NCR53C400 board. str - unused, ints - + * array of integer parameters with ints[0] equal to the number of ints. + * + */ + +static void internal_setup(int board, char *str, int *ints) { + static int commandline_current = 0; + switch (board) { + case BOARD_NCR5380: + if (ints[0] != 2 && ints[0] != 3) { + printk("generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n"); + return; + } + case BOARD_NCR53C400: + if (ints[0] != 2) { + printk("generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n"); + return; + } + } + + if (commandline_current < NO_OVERRIDES) { + overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type)ints[1]; + overrides[commandline_current].irq = ints[2]; + if (ints[0] == 3) + overrides[commandline_current].dma = ints[3]; + else + overrides[commandline_current].dma = DMA_NONE; + overrides[commandline_current].board = board; + ++commandline_current; + } +} + +/* + * Function : generic_NCR5380_setup (char *str, int *ints) + * + * Purpose : LILO command line initialization of the overrides array, + * + * Inputs : str - unused, ints - array of integer parameters with ints[0] + * equal to the number of ints. + */ + +void generic_NCR5380_setup (char *str, int *ints) { + internal_setup (BOARD_NCR5380, str, ints); +} + +/* + * Function : generic_NCR53C400_setup (char *str, int *ints) + * + * Purpose : LILO command line initialization of the overrides array, + * + * Inputs : str - unused, ints - array of integer parameters with ints[0] + * equal to the number of ints. + */ + +void generic_NCR53C400_setup (char *str, int *ints) { + internal_setup (BOARD_NCR53C400, str, ints); +} + +/* + * Function : int generic_NCR5380_detect(Scsi_Host_Template * tpnt) + * + * Purpose : initializes generic NCR5380 driver based on the + * command line / compile time port and irq definitions. + * + * Inputs : tpnt - template for this SCSI adapter. + * + * Returns : 1 if a host adapter was found, 0 if not. + * + */ + +int generic_NCR5380_detect(Scsi_Host_Template * tpnt) { + static int current_override = 0; + int count; + int flags = 0; + struct Scsi_Host *instance; + + if (ncr_irq != NCR_NOT_SET) + overrides[0].irq=ncr_irq; + if (ncr_dma != NCR_NOT_SET) + overrides[0].dma=ncr_dma; + if (ncr_addr != NCR_NOT_SET) + overrides[0].NCR5380_map_name=(NCR5380_map_type)ncr_addr; + if (ncr_5380 != NCR_NOT_SET) + overrides[0].board=BOARD_NCR5380; + else if (ncr_53c400 != NCR_NOT_SET) + overrides[0].board=BOARD_NCR53C400; + + tpnt->proc_dir = &proc_scsi_g_ncr5380; + + for (count = 0; current_override < NO_OVERRIDES; ++current_override) { + if (!(overrides[current_override].NCR5380_map_name)) + continue; + + switch (overrides[current_override].board) { + case BOARD_NCR5380: + flags = FLAG_NO_PSEUDO_DMA; + break; + case BOARD_NCR53C400: + flags = FLAG_NCR53C400; + break; + } + + instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata)); + instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name; + + NCR5380_init(instance, flags); + + if (overrides[current_override].irq != IRQ_AUTO) + instance->irq = overrides[current_override].irq; + else + instance->irq = NCR5380_probe_irq(instance, 0xffff); + + if (instance->irq != IRQ_NONE) + if (request_irq(instance->irq, generic_NCR5380_intr, SA_INTERRUPT, "NCR5380", NULL)) { + printk("scsi%d : IRQ%d not free, interrupts disabled\n", + instance->host_no, instance->irq); + instance->irq = IRQ_NONE; + } + + if (instance->irq == IRQ_NONE) { + printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); + printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); + } + + printk("scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int)instance->NCR5380_instance_name); + if (instance->irq == IRQ_NONE) + printk (" interrupts disabled"); + else + printk (" irq %d", instance->irq); + printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", + CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE); + NCR5380_print_options(instance); + printk("\n"); + + ++current_override; + ++count; + } + return count; +} + +const char * generic_NCR5380_info (struct Scsi_Host* host) { + static const char string[]="Generic NCR5380/53C400 Driver"; + return string; +} + +int generic_NCR5380_release_resources(struct Scsi_Host * instance) +{ + NCR5380_local_declare(); + + NCR5380_setup(instance); + + if (instance->irq != IRQ_NONE) + free_irq(instance->irq, NULL); + + return 0; +} + +#ifdef BIOSPARAM +/* + * Function : int generic_NCR5380_biosparam(Disk * disk, kdev_t dev, int *ip) + * + * Purpose : Generates a BIOS / DOS compatible H-C-S mapping for + * the specified device / size. + * + * Inputs : size = size of device in sectors (512 bytes), dev = block device + * major / minor, ip[] = {heads, sectors, cylinders} + * + * Returns : always 0 (success), initializes ip + * + */ + +/* + * XXX Most SCSI boards use this mapping, I could be incorrect. Some one + * using hard disks on a trantor should verify that this mapping corresponds + * to that used by the BIOS / ASPI driver by running the linux fdisk program + * and matching the H_C_S coordinates to what DOS uses. + */ + +int generic_NCR5380_biosparam(Disk * disk, kdev_t dev, int *ip) +{ + int size = disk->capacity; + ip[0] = 64; + ip[1] = 32; + ip[2] = size >> 11; + return 0; +} +#endif + +#if NCR53C400_PSEUDO_DMA +static inline int NCR5380_pread (struct Scsi_Host *instance, unsigned char *dst, int len) +{ + int blocks = len / 128; + int start = 0; + int i; + int bl; + NCR5380_local_declare(); + + NCR5380_setup(instance); + +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: About to read %d blocks for %d bytes\n", blocks, len); +#endif + + NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR); + NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + while (1) { + +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: %d blocks left\n", blocks); +#endif + + if ((bl=NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { +#if (NDEBUG & NDEBUG_C400_PREAD) + if (blocks) + printk("53C400r: blocks still == %d\n", blocks); + else + printk("53C400r: Exiting loop\n"); +#endif + break; + } + +#if 1 + if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + printk("53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); + return -1; + } +#endif + +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: Waiting for buffer, bl=%d\n", bl); +#endif + + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + ; +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: Transferring 128 bytes\n"); +#endif + +#ifdef CONFIG_SCSI_G_NCR5380_PORT + for (i=0; i<128; i++) + dst[start+i] = NCR5380_read(C400_HOST_BUFFER); +#else + /* implies CONFIG_SCSI_G_NCR5380_MEM */ + memmove(dst+start,NCR53C400_host_buffer+NCR5380_map_name,128); +#endif + start+=128; + blocks--; + } + + if (blocks) { +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: EXTRA: Waiting for buffer\n"); +#endif + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + ; + +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: Transferring EXTRA 128 bytes\n"); +#endif +#ifdef CONFIG_SCSI_G_NCR5380_PORT + for (i=0; i<128; i++) + dst[start+i] = NCR5380_read(C400_HOST_BUFFER); +#else + /* implies CONFIG_SCSI_G_NCR5380_MEM */ + memmove(dst+start,NCR53C400_host_buffer+NCR5380_map_name,128); +#endif + start+=128; + blocks--; + } +#if (NDEBUG & NDEBUG_C400_PREAD) + else + printk("53C400r: No EXTRA required\n"); +#endif + +#if (NDEBUG & NDEBUG_C400_PREAD) + printk("53C400r: Final values: blocks=%d start=%d\n", blocks, start); +#endif + + if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) + printk("53C400r: no 53C80 gated irq after transfer"); +#if (NDEBUG & NDEBUG_C400_PREAD) + else + printk("53C400r: Got 53C80 interrupt and tried to clear it\n"); +#endif + +/* DON'T DO THIS - THEY NEVER ARRIVE! + printk("53C400r: Waiting for 53C80 registers\n"); + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG) + ; +*/ + + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) + printk("53C400r: no end dma signal\n"); +#if (NDEBUG & NDEBUG_C400_PREAD) + else + printk("53C400r: end dma as expected\n"); +#endif + + NCR5380_write(MODE_REG, MR_BASE); + NCR5380_read(RESET_PARITY_INTERRUPT_REG); + return 0; +} + +static inline int NCR5380_pwrite (struct Scsi_Host *instance, unsigned char *src, int len) +{ + int blocks = len / 128; + int start = 0; + int i; + int bl; + NCR5380_local_declare(); + + NCR5380_setup(instance); + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: About to write %d blocks for %d bytes\n", blocks, len); +#endif + + NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE); + NCR5380_write(C400_BLOCK_COUNTER_REG, blocks); + while (1) { + if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) { + printk("53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks); + return -1; + } + + if ((bl=NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) { +#if (NDEBUG & NDEBUG_C400_PWRITE) + if (blocks) + printk("53C400w: exiting loop, blocks still == %d\n", blocks); + else + printk("53C400w: exiting loop\n"); +#endif + break; + } + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: %d blocks left\n", blocks); + + printk("53C400w: waiting for buffer, bl=%d\n", bl); +#endif + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + ; + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: transferring 128 bytes\n"); +#endif +#ifdef CONFIG_SCSI_G_NCR5380_PORT + for (i=0; i<128; i++) + NCR5380_write(C400_HOST_BUFFER, src[start+i]); +#else + /* implies CONFIG_SCSI_G_NCR5380_MEM */ + memmove(NCR53C400_host_buffer+NCR5380_map_name,src+start,128); +#endif + start+=128; + blocks--; + } + if (blocks) { +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: EXTRA waiting for buffer\n"); +#endif + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY) + ; + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: transferring EXTRA 128 bytes\n"); +#endif +#ifdef CONFIG_SCSI_G_NCR5380_PORT + for (i=0; i<128; i++) + NCR5380_write(C400_HOST_BUFFER, src[start+i]); +#else + /* implies CONFIG_SCSI_G_NCR5380_MEM */ + memmove(NCR53C400_host_buffer+NCR5380_map_name,src+start,128); +#endif + start+=128; + blocks--; + } +#if (NDEBUG & NDEBUG_C400_PWRITE) + else + printk("53C400w: No EXTRA required\n"); +#endif + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: Final values: blocks=%d start=%d\n", blocks, start); +#endif + +#if 0 + printk("53C400w: waiting for registers to be available\n"); + THEY NEVER DO! + while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG) + ; + printk("53C400w: Got em\n"); +#endif + + /* Let's wait for this instead - could be ugly */ + /* All documentation says to check for this. Maybe my hardware is too + * fast. Waiting for it seems to work fine! KLL + */ + while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ)) + ; + + /* + * I know. i is certainly != 0 here but the loop is new. See previous + * comment. + */ + if (i) { +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: got 53C80 gated irq (last block)\n"); +#endif + if (!((i=NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER)) + printk("53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n",i); +#if (NDEBUG & NDEBUG_C400_PWRITE) + else + printk("53C400w: Got END OF DMA\n"); +#endif + } + else + printk("53C400w: no 53C80 gated irq after transfer (last block)\n"); + +#if 0 + if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) { + printk("53C400w: no end dma signal\n"); + } +#endif + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: waiting for last byte...\n"); +#endif + while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT)) + ; + +#if (NDEBUG & NDEBUG_C400_PWRITE) + printk("53C400w: got last byte.\n"); + printk("53C400w: pwrite exiting with status 0, whoopee!\n"); +#endif + return 0; +} +#endif /* PSEUDO_DMA */ + +#include "NCR5380.c" + +#define PRINTP(x) len += sprintf(buffer+len, x) +#define ANDP , + +static int sprint_opcode(char* buffer, int len, int opcode) { + int start = len; + PRINTP("0x%02x " ANDP opcode); + return len-start; +} + +static int sprint_command (char* buffer, int len, unsigned char *command) { + int i,s,start=len; + len += sprint_opcode(buffer, len, command[0]); + for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) + PRINTP("%02x " ANDP command[i]); + PRINTP("\n"); + return len-start; +} + +static int sprint_Scsi_Cmnd (char* buffer, int len, Scsi_Cmnd *cmd) { + int start = len; + PRINTP("host number %d destination target %d, lun %d\n" ANDP + cmd->host->host_no ANDP + cmd->target ANDP + cmd->lun); + PRINTP(" command = "); + len += sprint_command (buffer, len, cmd->cmnd); + return len-start; +} + +int generic_NCR5380_proc_info(char* buffer, char** start, off_t offset, int length, int hostno, int inout) +{ + int len = 0; + NCR5380_local_declare(); + unsigned char status; + int i; + struct Scsi_Host *scsi_ptr; + Scsi_Cmnd *ptr; + Scsi_Device *dev; + struct NCR5380_hostdata *hostdata; + + cli(); + + for (scsi_ptr = first_instance; scsi_ptr; scsi_ptr=scsi_ptr->next) + if (scsi_ptr->host_no == hostno) + break; + NCR5380_setup(scsi_ptr); + hostdata = (struct NCR5380_hostdata *)scsi_ptr->hostdata; + + PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name); + PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE); + PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE); +#ifdef NCR53C400 + PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE); + PRINTP("NCR53C400 card%s detected\n" ANDP (((struct NCR5380_hostdata *)scsi_ptr->hostdata)->flags & FLAG_NCR53C400)?"":" not"); +# if NCR53C400_PSEUDO_DMA + PRINTP("NCR53C400 pseudo DMA used\n"); +# endif +#else + PRINTP("NO NCR53C400 driver extensions\n"); +#endif + PRINTP("Using %s mapping at %s 0x%x, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name); + if (scsi_ptr->irq == IRQ_NONE) + PRINTP("no interrupt\n"); + else + PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq); + +#ifdef NCR5380_STATS + if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue) + PRINTP("There are commands pending, transfer rates may be crud\n"); + if (hostdata->pendingr) + PRINTP(" %d pending reads" ANDP hostdata->pendingr); + if (hostdata->pendingw) + PRINTP(" %d pending writes" ANDP hostdata->pendingw); + if (hostdata->pendingr || hostdata->pendingw) + PRINTP("\n"); + for (dev = scsi_devices; dev; dev=dev->next) { + if (dev->host == scsi_ptr) { + unsigned long br = hostdata->bytes_read[dev->id]; + unsigned long bw = hostdata->bytes_write[dev->id]; + long tr = hostdata->time_read[dev->id] / HZ; + long tw = hostdata->time_write[dev->id] / HZ; + + PRINTP(" T:%d %s " ANDP dev->id ANDP (dev->type < MAX_SCSI_DEVICE_CODE) ? scsi_device_types[(int)dev->type] : "Unknown"); + for (i=0; i<8; i++) + if (dev->vendor[i] >= 0x20) + *(buffer+(len++)) = dev->vendor[i]; + *(buffer+(len++)) = ' '; + for (i=0; i<16; i++) + if (dev->model[i] >= 0x20) + *(buffer+(len++)) = dev->model[i]; + *(buffer+(len++)) = ' '; + for (i=0; i<4; i++) + if (dev->rev[i] >= 0x20) + *(buffer+(len++)) = dev->rev[i]; + *(buffer+(len++)) = ' '; + + PRINTP("\n%10ld kb read in %5ld secs" ANDP br/1024 ANDP tr); + if (tr) + PRINTP(" @ %5ld bps" ANDP br / tr); + + PRINTP("\n%10ld kb written in %5ld secs" ANDP bw/1024 ANDP tw); + if (tw) + PRINTP(" @ %5ld bps" ANDP bw / tw); + PRINTP("\n"); + } + } +#endif + + status = NCR5380_read(STATUS_REG); + if (!(status & SR_REQ)) + PRINTP("REQ not asserted, phase unknown.\n"); + else { + for (i = 0; (phases[i].value != PHASE_UNKNOWN) && + (phases[i].value != (status & PHASE_MASK)); ++i) + ; + PRINTP("Phase %s\n" ANDP phases[i].name); + } + + if (!hostdata->connected) { + PRINTP("No currently connected command\n"); + } else { + len += sprint_Scsi_Cmnd (buffer, len, (Scsi_Cmnd *) hostdata->connected); + } + + PRINTP("issue_queue\n"); + + for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; + ptr = (Scsi_Cmnd *) ptr->host_scribble) + len += sprint_Scsi_Cmnd (buffer, len, ptr); + + PRINTP("disconnected_queue\n"); + + for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; + ptr = (Scsi_Cmnd *) ptr->host_scribble) + len += sprint_Scsi_Cmnd (buffer, len, ptr); + + *start = buffer + offset; + len -= offset; + if (len > length) + len = length; + sti(); + return len; +} + +#undef PRINTP +#undef ANDP + +#ifdef MODULE +/* Eventually this will go into an include file, but this will be later */ +Scsi_Host_Template driver_template = GENERIC_NCR5380; + +#include <linux/module.h> +#include "scsi_module.c" +#endif |